Fun and Easy DIY Luggage Tag

October 23, 2017By Anna AldmonDIY, Projects, Sewing 2 Comments Opinion by Paid Consultant

Whether you are traveling this holiday time or just need to give your luggage a new look, this cute DIY luggage tag project is quick and easy to make. It can be used to identify your sewing machine bag, computer bag, back pack, baby bag, tote bag and of course a suitcase. There are many cute ribbons you can add on as well. You can select fabric and stitch out a design for a special occasion or just make it out of a fun fabric that will stand out when looking for your suitcase or bag.

The Luggage / Bag Tag finishes at 2 ¾” x 4”. The vinyl pocket will fit a standard business card.

Materials:

  • (2) 2 ¾” x 4” – Double Sided Fusible “Stiff Interfacing / Firm Stabilizer”
  • (2) 4 ½” x 5 ½” – Cotton Fabric for Front and Back of Tag
  • (1) 2 ¾” x 3 5/8”- Clear Vinyl – 12-16 Gauge
  • (1) 12” long – 5/8” wide Ribbon

Fun DIY Luggage Tag

Supplies:

  • Tape – embroidery tape or painters tape
  • Glue Stick
  • Applique Sheet
  • 90/14 needle – to go through thickness of “Stiff Interfacing / Firm Stabilizer”
  • Embroidery Thread – To match or contrast fabric and to support lettering or design on back side of Tag
  • 4” x 4” embroidery hoop

Embroidery File information:

  • This project will all be done in the hoop. There are 2 different embroidery files: Luggage Tag 1.PES and Luggage Tag 2.PES. The instructions below indicate when to use each file.

Fabric Preparation:

  • Place the Applique sheet on top of an ironing surface. Center one of the “Stiff Interfacing / Firm Stabilizer” on the wrong side of one of the fabrics.

Fun DIY Luggage Tag

  • Turn over the “Stiff Interfacing / Firm Stabilizer” and fabric on top of the Applique sheet and press with a craft iron.

Fun DIY Luggage Tag

  • Turn the unit over. Press the top and bottom fabric over onto the “Stiff Interfacing / Firm Stabilizer”.

Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • On the short ends, fold the ends of the fabric at 45 degrees. Press as needed. Use Glue Stick to secure folded fabric. Then fold the end over and press on both ends.

Fun DIY Luggage Tag
Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Repeat the same Fabric Preparation for the second fabric and “Stiff Interfacing / Firm Stabilizer”.

Fun DIY Luggage Tag

Embroidery Directions Part 1:

  1. Use a Tear Away Stabilizer in a 4” x 4” hoop.
  2. Load the Luggage Tag 1 embroidery design. This file contains the Placement stitch for positioning one of the Fabric and “Stiff Interfacing / Firm Stabilizer” unit.
  3. With the design loaded, Click on the Set button.
  4. Click on the Add button to add the design or letters that will be stitched out on the back side of the Luggage Tag.

Fun DIY Luggage Tag
Fun DIY Luggage Tag
Fun DIY Luggage Tag

Note: I used the fonts built into THE Brother Dream Machine to spell out my name.

Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Click on the Edit button, then select Size option. Use the various icons to have the text fit within the Placement Stitches.

Fun DIY Luggage Tag
Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Click on the OK button. There are now 2 objects in the window ready to be stitched out. The first is part of the Luggage Tag 1 embroidery file, and the second is the added text. Remember you can add your own embroidery file that will stitch out on the back side of the luggage tag.

Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Stitch out the first object onto the Tear Away Stabilizer. This is the Placement stitch to position the back side of the luggage tag.

Fun DIY Luggage Tag

  • Remove the hoop from the embroidery unit and place on a flat surface. Place one of the fabric and “Stiff Interfacing / Firm Stabilizer” unit on top of the tear away stabilizer within the Placement stitches. Align to the left, top and bottom. Secure with Tape.

Fun DIY Luggage Tag
Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Return the hoop back to the embroidery unit and stitch out the “added” design. In this example, it is the text “Anna”.

Fun DIY Luggage Tag

  • Remove the tape from the front of the design, then gently remove the fabric unit from the stabilizer in the hoop.

Fun DIY Luggage Tag

Embroidery Directions Part 2:

  1. Use a Tear Away Stabilizer in a 4” x 4” hoop.
  2. Load the Luggage Tag 2 embroidery design.

This file has 3 steps.

  1. Placement Stitch to position second fabric unit
  2. Triple stitch to secure the vinyl
  3. Triple stitch to secure both fabric units and ribbon together.
Note: Place Tape over the top right edge of the vinyl so the embroidery foot will not get caught under the vinyl.
  • Stitch out the Placement stitch on the Tear Away Stabilizer. Remove hoop from embroidery unit and place on a flat surface. Position second fabric unit and vinyl within the Placement stitches, aligning on top, bottom and left side. Tape both pieces.

Fun DIY Luggage Tag

  • Change color thread to match the fabric. Stitch the triple stitch to secure the vinyl to the fabric and to the stabilizer.

Fun DIY Luggage Tag

  • Remove the hoop from the embroidery unit and place on flat surface. Remove the tape using tweezers.

Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Turn the hoop over. Fold the Ribbon in half and tape into place. Position the first fabric unit so that it lines up with the second fabric unit which is on the front of the hoop. Tape into place.

Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • Return hoop to embroidery unit. Make sure the Ribbon is not under the hoop. Consider changing bobbin thread to match the color of the fabric.

Fun DIY Luggage Tag

  • Remove the hoop from the embroidery unit. Remove the tape from the back fabric. Remove the design from the hoop and gently pull the tear away stabilizer from the design.

Fun DIY Luggage Tag
Fun DIY Luggage Tag

  • This design can also be stitched out on any Brother single needle or multiple needle embroidery machine that supports a 4” x 4” stitch area.

These FREE Luggage Tag Patterns Luggage Tag 1.PES and Luggage Tag 2.PES were designed by Anna Aldmon of Anna’s Awesome Appliqué Designs.

Print Friendly

2 Comments

  • I LOVE this project! I especially like the pocket for a business card.These would make such great small gifts for friends, as well as nice stocking stuffers for family. Thanks for the great instructions and idea.

  • I think I will embroider the name as suggested and then use it as a gift tag for my present. Then the recipient can use the tag for their luggage. 2 uses/gifts in 1. Thank you for this useful design.

Leave a Reply

Your email address will not be published. Required fields are marked *