Quick Tip: Getting to know the MuVit Dual Feed Foot Part One

December 30, 2019By Joanne BankoArticles, News, Quick Tip 10 Comments Opinion by Paid Consultant

The Brother MuVit foot is a unique specialty foot designed to enhance the feeding of fabric layers. Note that this foot is included with specific Brother machines and available as an option for others. Visit Brother-usa.com to learn more and contact your local Brother dealer to explore your options.

To understand how this foot is different, it’s helpful to know how machines are designed to work under ordinary sewing circumstances. With standard presser feet, the presser foot puts pressure on fabric under the foot, keeping it in place while the stitch forms, and then the feed dogs advance the fabric and carry fabric layers in a forward, backward, or possibly even a side to side motion. If you’ve ever tried to do “normal” sewing with the feed dogs unintentionally in the down position you know that the fabric simply stays in place without the benefit of the feed dogs to move what’s underneath the presser foot. When sewing with standard sewing feet there may be a slight amount of easing of the fabric that comes in contact with the bottom, feed dog side. Since the top layer of fabric is not in direct contact with the feed dogs the two layers may shift or feed at a different rate.

As part of the sewing operation we compensate for this in many different ways. We may use pins to secure fabric layers, use hand basting to keep material layers together, or we may use conscious, or even unconscious methods of holding the fabric so that both our top and bottom layers move evenly through the machine. These common methods can work in many situations. However, in other, more challenging situations, we find that fabric layers tend to misbehave and fight with one another, especially when we’re combining fabric layers that are unalike and feed differently. That’s where an even feed foot comes to the rescue! You may already be familiar with a Walking Foot. This foot is available for Brother machines with zig zag capability and is found in a 7mm version and a 5mm version. I’ll talk more about the Walking foot in the near future.

This tip sheet highlights the MuVit foot. You can think of it as a close cousin to the walking foot, but it really is quite unique. This foot is a digitally controlled, motor driven even feed foot designed for powerful, precision sewing on a wide range of fabrics and fabric combinations. You may think of it as a walking foot with superpowers! Let’s explore some unique characteristics of the MuVit foot.

Notice the plug at the back of the foot.

This is inserted in a specific spot at the back of the machine and it tells the machine the foot is operable.

When selecting stitches on the screen of the machine you’ll see that some are greyed out, and unsuitable for sewing with this foot. This is a great help since there is no chance of making a mistake and choosing the wrong stitch for use with MuVit foot feeding action.

To attach the foot to the machine, the standard foot holder is removed and the foot is securely screwed in place.

The MuVit foot comes with a standard closed toe sole plate with distinct markings useful for pivoting and alignment on a variety of different projects. Markings are especially useful for specific seam allowances and accurate stitching on quilt blocks when you want stitches evenly spaced a distance from existing seams and finished edges. Notice the black belt in the center. The built-in motor on the foot drives this belt as it makes contact with the fabric layers and feeds the fabric with dual action, working along with the feed dogs and controlling the movement on both top and bottom layers as you stitch.

The lever on the foot needs to be in the down position for the foot to work its magic. However, the lever can be flipped to the up position to deactivate the dual feed action and sew without having the dual feed action take place.

The standard/default setting for the foot is 00. By accessing the set mode on the machine you’ll see that there is a wide span of settings ranging from positive 10 to negative 10. There is no hard and fast formula for which settings to choose but it’s helpful to know that increases in the positive range means the belt will move faster and consequently in the negative range the belt will move slower. The wide range of settings allows for incremental adjustments. Experimentation and experience are your best guide for using customized settings. Simply put, if your top layer(s) need more easing, you’ll want to increase the positive setting, thus speeding up the drive of the belt. If your top layer(s) needs to be stretched out to provide more taught sewing, you’ll want to go towards the negative setting, so the belt moves slower.

Keep a record of various settings with fabric combinations you plan to repeat, and you’ll be on your way to completing your project sooner the next time around. Tricky fabrics and fabric combinations are easily overcome using the power of this digitally controlled super feeding foot! I hope these tips help you get acquainted with the Brother MuVit foot. Stay tuned for the next installment. In the meantime, we welcome your comments and questions!


  • This foot is remarkable and Joanne Banko did a great job explaining it. Great tip to keep a record for different settings.

    • Thanks for sharing your thoughts Janice! Stay tuned, we’ll have more about the remarkable MuVit foot coming in future posts.

  • I recently purchased my Dream Machine 2 and have lots of “goodies” that come with my machine. I came across this tutorial and am amazed at how this foot functions. I am taking the time to use scraps and making notes as to the functions of this remarkable foot. Thank you for taking the time to put this together. You make our lives so much easier!!!

    • Hello Marti!
      It was so nice to hear your comments. I’m so glad you found this tutorial helpful. You’re in for a ton of fun with your Brother Dream Machine2 and all the great goodies that came with it! The MuVit foot will help you in so many different sewing situations. You’re very wise to make samples and record the results. Not only will it save you time and effort in the future, the samples will give you a great sense of accomplishment. Happy Sewing!

    • Hi Susy!

      I apologize for not seeing your comment earlier. If you are missing JUST the actual sole that snaps onto the MuVit foot SA196 attachment, then you would need to order it as a part, not an accessory. The part number for the standard (regular) foot that snaps on is XF4419-001. Hope this helps. Please reach out if you have any other questions.

  • Thank you for the information about the speed of the belt. I didn’t know that an adjustment could be made. Thanks for the great tip.

  • HI, My quilt in bunching up inbetween the back of the foot and the front of the dual feed attachment. It causes very tiny stitches because the fabric is not moving, and I have to stop, un bunch, then rip out, and redo. My machine speed is slowed down,There is not much visibility behind the foot, so it is about 3 to 5 inches of jammed quilt top I have to rip out and restart over. What can I do to correct this.

  • Hello,
    This information was very educational, as I have just used this dual foot on completing a large quilt. I own the Stellaire XJ1 machine and just love it.

Leave a Reply

Your email address will not be published. Required fields are marked *